[OS X TeX] png files not generated
Victor Ivrii
vivrii at gmail.com
Sat Jun 17 23:16:24 EDT 2006
On 6/17/06, Don Salisbury <dsalisbury at austincollege.edu> wrote:
> Dear Folks,
>
> I have squandered hours on the following problem, and I'd be so
> grateful if any of you had a resolution.
>
> I am trying to generate html code from tex. I had a working system
> before I lost my hard drive... I'm running system 10.4.6.
1) Are you running command `htlatex'?
2) Do you have a recent version of ImageMagick (try type `convert' on
terminal prompt)?
These are usual suspects
>
> I tried uninstalling the entire list of packages listed on
> www.uoregon.edu/~koch/texshop/installing.html. Then I went through
> the full installation procedure in the order given on that page. The
> problem is that when I run the macro htlatexc on Texshop, no .png
> files are generated. I ran the following test file that has only one
> mathematical expression:
>
> \documentclass[12 pt]{article}
>
> \begin{document}
>
> I am trying to display
> $$
> \{ \epsilon {}^\alpha\!{\cal H}_{0} ,
> { \eta} {}^\alpha\!{\cal H}_{0} \}
> $$
>
> \end{document}
>
> An html document is produced - but with the .png file missing.
>
> Here is the log file:
>
> This is pdfeTeX, Version 3.141592-1.30.4-2.2 (Web2C 7.5.5)
> (format=latex 2006.6.17) 17 JUN 2006 15:04
> entering extended mode
> **\makeatletter\def\HCode{\futurelet\HCode\HChar}\def\HChar
> {\ifx"\HCode\def\HCo
> de"##1"{\Link##1}\expandafter\HCode\else\expandafter\Link\fi}\def
> \Link#1.a.b.c.
> {\g at addto@macro\@documentclasshook{\RequirePackage[#1,html]{tex4ht}}
> \let\HCode\
> documentstyle\def\documentstyle{\let\documentstyle\HCode\expandafter
> \def\csname
> tex4ht\endcsname{#1,html}\def\HCode####1{\documentstyle[tex4ht,}
> \@ifnextchar[{
> \HCode}{\documentstyle[tex4ht]}}}\makeatother\HCode .a.b.c.\input
> test61706d
> (./test61706d.tex
> (/usr/local/teTeX/share/texmf.tetex/tex/latex/base/article.cls
> Document Class: article 2004/02/16 v1.4f Standard LaTeX document class
> (/usr/local/teTeX/share/texmf.tetex/tex/latex/base/size12.clo
> File: size12.clo 2004/02/16 v1.4f Standard LaTeX file (size option)
> )
> \c at part=\count79
> \c at section=\count80
> \c at subsection=\count81
> \c at subsubsection=\count82
> \c at paragraph=\count83
> \c at subparagraph=\count84
> \c at figure=\count85
> \c at table=\count86
> \abovecaptionskip=\skip41
> \belowcaptionskip=\skip42
> \bibindent=\dimen102
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/tex4ht.sty
> version 2005-09-27-01:01
> Package: tex4ht
> --------------------------------------
> --- Note --- for _ at preamble, use the command line option `early_'
> --------------------------------------
> --------------------------------------
> --- Note --- for ^ at preamble, use the command line option `early^'
> --------------------------------------
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/tex4ht.4ht
> version 2005-10-23-20:57
> --------------------------------------
> --- Note --- for additional information, use the command line option
> `info'
> --------------------------------------
>
> ::::::::::::::::::::::::::::::::::::::::::
> TeX4ht info is available in the log file
> ::::::::::::::::::::::::::::::::::::::::::
> ) (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/tex4ht.sty
> version 2005-09-27-01:01
>
> --- needs --- tex4ht test61706d ---
> \tmp:cnt=\count87
> \openout15 = `test61706d.tmp'.
>
> (./test61706d.tmp)
> \tmp:toks=\toks14
> \tmp:dim=\skip43
> --------------------------------------
> --- Note --- for XML code, use the command line option `xml' or `xhtml'
> --------------------------------------
> (./test61706d.xref)
> \:refout=\write3
> \openout3 = `test61706d.xref'.
>
>
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4.4ht
> version 2005-10-22-16:24
> --------------------------------------
> --- Note --- to remove the DOCTYPE declaration use the command line
> option `no-
> DOCTYPE'
> --------------------------------------
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4-math.4ht
> version 2005-10-22-16:24
> )
> --------------------------------------
> --- Note --- for marking of the base font, use the command line
> option `fonts+'
>
> --------------------------------------
> --------------------------------------
> --- Note --- for non active _, use the command line option `no_'
> --------------------------------------
> --------------------------------------
> --- Note --- for _ of catcode 13, use the command line option `_13'
> --------------------------------------
> --------------------------------------
> --- Note --- for non active ^, use the command line option `no^'
> --------------------------------------
> --------------------------------------
> --- Note --- for ^ of catcode 13, use the command line option `^13'
> --------------------------------------
>
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4.4ht
> version 2005-10-22-16:24
> --------------------------------------
> --- Note --- for alternative charset, use the command line option
> `charset=...'
>
> --------------------------------------
> --------------------------------------
> --- Note --- to ignore CSS font decoration, use the `NoFonts' command
> line opti
> on
> --------------------------------------
> --------------------------------------
> --- Note --- for jpg bitmaps, use the `jpg' command line option
> --------------------------------------
> --------------------------------------
> --- Note --- for gif bitmaps, use the `gif' command line option
> --------------------------------------
> --------------------------------------
> --- Note --- for content and toc in 2 frames, use the command line
> option `fram
> es'
> --------------------------------------
> --------------------------------------
> --- Note --- for content, toc, and footnotes in 3 frames, use the
> command line
> option `frames-fn'
> --------------------------------------
> --------------------------------------
> --- Note --- for file extension name xht, use the command line option
> `xht'
> --------------------------------------
> TeX4ht package options: html
> --------------------------------------
> --- Note --- for inline CSS code, use the command line option `css-in'
> --------------------------------------
> --------------------------------------
> --- Note --- for pop ups on mouse over, use the command line option
> `mouseover'
>
> --------------------------------------
> --------------------------------------
> --- Note --- for addressing images in a subdirectory, use the command
> line opti
> on `imgdir:.../'
> --------------------------------------
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4-math.4ht
> version 2005-10-22-16:24
> )
> \:tokwrite=\toks15
> \:tokpage=\toks16
> --------------------------------------
> --- Note --- for back links to toc, use the command line option
> `sections+'
> --------------------------------------
> --------------------------------------
> --- Note --- for linear crosslinks of pages, use the command line
> option `next'
>
> --------------------------------------
> \openout15 = `test61706d.4ct'.
>
> \:tocout=\write4
> \openout4 = `test61706d.4tc'.
>
>
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4.4ht
> version 2005-10-22-16:24
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4-math.4ht
> version 2005-10-22-16:24
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/latex.4ht
> version 2005-10-23-04:19
> --------------------------------------
> --- Note --- for links into captions, instead of float heads, use the
> command l
> ine option `refcaption'
> --------------------------------------
>
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4.4ht
> version 2005-10-22-16:24
> --------------------------------------
> --- Note --- for enumerated list elements li's without value
> attributes, use th
> e command line option `li-'
> --------------------------------------
> --------------------------------------
> --- Note --- for CSS2 code, use the command line option `css2'
> --------------------------------------
> --------------------------------------
> --- Note --- for pictorial tabular, use the command line option `pic-
> tabular'
> --------------------------------------
> --------------------------------------
> --- Note --- for bitmap fbox'es, use the command line option `pic-fbox'
> --------------------------------------
> --------------------------------------
> --- Note --- for bitmap framebox'es, use the command line option `pic-
> framebox'
>
> --------------------------------------
> --------------------------------------
> --- Note --- for inline footnotes use command line option `fn-in'
> --------------------------------------
> --------------------------------------
> --- Note --- for a JavaHelp output format, use the command line
> option `javahel
> p'
> --------------------------------------
> --------------------------------------
> --- Note --- for tracing of latex font commands, use the command line
> option `f
> onts'
> --------------------------------------
> --------------------------------------
> --- Note --- for width specifications of tabular p entries, use the
> `p-width' c
> ommand line option or a configuration similar to \Configure{HColWidth}
> {\HCode{
> style="width:\HColWidth"}}
> --------------------------------------
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4-math.4ht
> version 2005-10-22-16:24
> --------------------------------------
> --- Note --- for pictorial eqnarray, use the command line option `pic-
> eqnarray'
>
> --------------------------------------
> --------------------------------------
> --- Note --- for pictorial array, use the command line option `pic-
> array'
> --------------------------------------
> --------------------------------------
> --- Note --- for pictorial $...$ environments, use the command line
> option `pic
> -m' (not recommended!!)
> --------------------------------------
> --------------------------------------
> --- Note --- for pictorial $...$ and $$...$$ environments with latex
> alt, use t
> he command line option `pic-m+' (not safe!!)
> --------------------------------------
> --------------------------------------
> --- Note --- for pictorial array, use the command line option `pic-
> array'
> --------------------------------------
> ))
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/fontmath.4ht
> version 2005-10-23-04:19
>
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4.4ht
> version 2005-10-22-16:24
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4-math.4ht
> version 2005-10-22-16:24
> ))
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/article.4ht
> version 2005-10-23-04:19
>
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4.4ht
> version 2005-10-22-16:24
> --------------------------------------
> --- Note --- for automatic sectioning pagination, use the command
> line option `
> 1', `2', `3', '4', '5', '6', or '7'
> --------------------------------------
> --------------------------------------
> --- Note --- for files named after section titles, use the command
> line option
> `sec-filename'
> --------------------------------------
> --------------------------------------
> --- Note --- for i-columns index, use the command line option
> `index=i' (e.g.,
> index=2)
> --------------------------------------
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4-math.4ht
> version 2005-10-22-16:24
> ))
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4.4ht
> version 2005-10-22-16:24
> )
> (/usr/local/teTeX/share/texmf.local/tex/generic/tex4ht/html4-math.4ht
> version 2005-10-22-16:24
> ))
> (./test61706d.aux)
> \openout1 = `test61706d.aux'.
>
> LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 3.
> LaTeX Font Info: ... okay on input line 3.
> LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 3.
> LaTeX Font Info: ... okay on input line 3.
> LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 3.
> LaTeX Font Info: ... okay on input line 3.
> LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 3.
> LaTeX Font Info: ... okay on input line 3.
> LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 3.
> LaTeX Font Info: ... okay on input line 3.
> LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 3.
> LaTeX Font Info: ... okay on input line 3.
> --- file test61706d.css ---
> LaTeX Font Info: External font `cmex10' loaded for size
> (Font) <12> on input line 6.
> LaTeX Font Info: External font `cmex10' loaded for size
> (Font) <8> on input line 6.
> LaTeX Font Info: External font `cmex10' loaded for size
> (Font) <6> on input line 6.
> l. 6 Writing test61706d.idv[1] (test61706d0x.png)
> [1
>
> ] (./test61706d.aux) )
> Here is how much of TeX's memory you used:
> 3323 strings out of 95138
> 34775 string characters out of 1183036
> 2190492 words of memory out of 4645327
> 6494 multiletter control sequences out of 10000+50000
> 6376 words of font info for 23 fonts, out of 2000000 for 2000
> 58 hyphenation exceptions out of 5000
> 24i,4n,21p,613b,209s stack positions out of 5000i,500n,6000p,200000b,
> 40000s
>
> Output written on test61706d.dvi (1 page, 8900 bytes).
>
> Can anyone help?
>
> Many thanks,
>
> Don
>
>
>
> Donald Salisbury
> Associate Professor of Physics
> Austin College
> Sherman, TX 75090
> http://artemis.austincollege.edu/acad/physics/dsalis
> dsalisbury at austincollege.edu
>
>
>
> ------------------------- Info --------------------------
> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
> & FAQ: http://latex.yauh.de/faq/
> TeX FAQ: http://www.tex.ac.uk/faq
> List Archive: http://tug.org/pipermail/macostex-archives/
>
>
--
========================
Victor Ivrii, Department of Mathematics, University of Toronto
------------------------- Info --------------------------
Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
& FAQ: http://latex.yauh.de/faq/
TeX FAQ: http://www.tex.ac.uk/faq
List Archive: http://tug.org/pipermail/macostex-archives/
More information about the MacOSX-TeX
mailing list